Viewing 1 post (of 1 total)
  • Author
  • #11290
    kerr stovin

    Hello everyone,
    I have a couple of questions on building the C1. Any pictures/ diagrams or descriptions on how others have done these jobs, before I commit to fitting them, would be greatly appreciated.
    Wire Tow Straps– The MSA recommend 4 wires straps are fitted with a M10 Fixing but I was wondering where people fitted them front and rear and did they weld in any reinforcement if putting the bolts through the bumper bars etc.
    Fire extinguisher nozzles – I am using a lifeline system with 8 nozzles 4 engine bay and 4 interior.
    For the interior, have people run 2 passenger 2 drivers on the bulkhead in case they have passengers or have they run all 4 in the drivers. If all 4, should they all go on the bulkhead?
    For the engine bay, any pics would be great on where people ran the pipes as I was wanting to avoid running them on the metal scuttle panel in case I had to remove this to swap the engine.

Viewing 1 post (of 1 total)
  • You must be logged in to reply to this topic.