Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #22237
    Simon
    Participant

    Just finished re-shelling my car ready for the new season and tried to start it today. I transferred the ECU over but used the new car ignition module and key barrel. On turning on the ignition only the check engine light, handbrake light and alternator light switch on and the power steering light and abs light flicker and then turn off as normal. The odometer panel does not switch on.
    When I plugged in my OBD reader all the lights illuminate as normal including the odometer panel but the car will not start.
    I’ve checked all the fuses and earths and I’m 99% sure I’ve connected everything correctly. I’ve also tried switching the ECU, immobiliser, instrument panel and the ignition barrel but the same symptoms occur.
    Does anyone have any idea how to resolve or do I need to reflash ECU to try to sort it.

    Thanks.

    #22272
    Mikkel Olsen
    Participant

    Have you tried to match the ECU and IMMO box to each other?

    There are plenty of guides on youtube, but its just shorting pin 4+13 in the OBD plug for 30 minutes.with ignition on.

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.