Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #11171

    I’ve replaced the front springs and suspension as per the racing regs, but when we took the car off the ramp and on it’s wheels we found that the top cup washers were sitting about 4mm above the inner wing strut mount. I triple checked everything when I did the replacement, and I am pretty handle with the spanners, but having checked again I can’t see any reason why.

    So, I gave up, bought two new top rubber mounts and anti friction bearings and took it to a mechanic to replace and check. He has stripped it down and still can’t see any obvious reason why there is play at the top.

    At the risk of appearing to look like an idiot, can anyone advise on this?

    Thanks, Steve


    Some pictures might be helpful. Also what parts did you fit?

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.