Viewing 13 posts - 1 through 13 (of 13 total)
Viewing 13 posts - 1 through 13 (of 13 total)
- You must be logged in to reply to this topic.
Anyone know if these are compatible with the club Tuff Jug spout?
can’t find the Tuff Jugs for less than £45 each
Thanks in advance
Marvin
No not compatible
go direct to Sunoco he will look after you, those ones I your link don’t have the ripper valve which is extra hence they are cheap.
Think my pair were 85 inc vat and I picked them up.
Call them and speak nicely and they will do you a deal.
These are the ones that the club say to use.
Will the red ripper neck fit the narrow fuel filler neck on the C1, looks too wide to me?
You must use the Tuff Jug spout as seen in the Club shop.
Phil
Can you please confirm which fuel container we must use?
Reading the regs (section below) it must be a Tuffjug I thought,
2.11.1 Re-fuelling must be carried out using a Sunoco/Fair Trails Enterprises Inc. Tuff Jug fitted with the Tuff Jug Multi Spout adaptor on the Ripper valve.
We got ours from Dirt Bike Express – £34.99
https://www.dirtbikexpress.co.uk/product/tuff_jug_ripper_fuel_can_-_blue
I suggest you consider getting a white one so you can see the fuel level.
Thats a really good point, one which I had thought about!
is it allowed to refill tough jugs from jerry cans in garages?
No decanting of fuel between containers is permitted.
Understand the no fuel decanting
Please advise what we do when there is no fuel on site
Pembrey springs to mind
At Pembrey last year, there was a dedicated area behind pit area for storing/filling Jerrycans tuff jugs.