Viewing 6 posts - 1 through 6 (of 6 total)
Viewing 6 posts - 1 through 6 (of 6 total)
- You must be logged in to reply to this topic.
Am prepping a March 2014 C1 without a rev counter and taking the cowl off revealed no connector! – anyone know the wiring to connect one up?
thanks
hi
if yours is a face lift model without power windows then there isn’t a plug.
you will need to change the loom to a earlier model
andy
It is the facelift with no power windows was hoping for a short cut ie splicing into the existing loom.
thanks
I just discovered that my 2008 C1 without power windows also has no plug for the rev counter.
frogeye2, did you ever find a solution to this issue?
Daniel – apologies but have been away – yes I did sort it give me a ring on 0795 123 8787 and I can talk you thru it.
Richard
Richard or Daniel, I’m about to built a C1 and just seen that I don’t have the connector either… damn… any chance you could help on that? Deeply appreciate it!