Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #2222
    symoncockill
    Participant

    Is it best to fit cage then cut and fit dash or cut dash in place when fitting cage

    #2223
    Rich Bernard
    Participant

    You need to cut the dash to get the cage in. If you remove the top half of the dash, then you can fit the cage and cut the dash to refit it.

    #2224
    symoncockill
    Participant

    Thanks for that but the dash is out ,what I was getting at is it best/or can you cut and fit dash after roll cage has been fitted or does it need to be cut when in place to fit cage

    cheers

    #2225
    Rich Bernard
    Participant

    We cut ours after the cage was fitted. Far easier.

    #2234
    swift92sc
    Participant

    Any dash video cut out available on you tube?

    #2236
    symoncockill
    Participant

    Hi Swift92sc have you good the link to the video please

     

Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.