Description
This wiring kit enables you to run your fuel pump to remove fuel from the tank without the danger of sparks inside the car!
The fuel pump wiring is interrupted with a pair of superseal connectors which, when separated allow the use of a further cable to plugged in to run the fuel pump.
The supplied cable plugs into the cigarette lighter socket at one end and plugs into a superseal connector at the other.
Works when the key is turned to acc position 1, ignition circuit off.
All fittings are supplied, you will only need to use an uninsulated connector crimping tool.
This wiring kit when used in conjunction with our under bonnet dry break fuel point will ensure the minimum hazard when pumping fuel from your tank and preclude the need to disturb the fuel pump cover inside the car.
